玻璃雨棚是现在比较热门的一种雨棚的种类，这种雨棚的样式是比较的有特点的，看起来也是比较的赏心悦目的，所以玻璃雨棚在市场上还是非常的受欢迎的一种雨棚。玻璃雨棚一般就是使用在建筑物的大门处的，有很好的遮风挡雨的效果。下面小编就来给大家介绍一下玻璃雨棚在市场上的是多少，还有就是玻璃雨棚的结构是什么样的，以及玻璃雨棚的安装方法是什么样的。

　　Glass canopy is a popular type of canopy nowadays, with a distinctive style that looks pleasing to the eye. Therefore, glass canopy is still a very popular type of canopy in the market. Glass canopies are usually used at the entrance of buildings and have a good effect of blocking wind and rain. Below, the editor will introduce to you the price of glass canopies in the market, as well as the structure and installation method of glass canopies.

　　玻璃雨棚的

　　The price of glass canopy

　　玻璃的一般在每平米200元到500元之间，再加上钢结构成本，玻璃雨棚平均在每800元到2000元之间。(来源网络，仅供参考。)

　　The price of glass is generally between 200 and 500 yuan per square meter, plus the cost of steel structure, the average price of glass canopy is between 800 and 2000 yuan per square meter. (Price source online, for reference only.)

　　另外安装玻璃雨棚是要支付费用的，根据安装面积大小，需要使用到的设备和人力不同，安装费用也是不同的。有的厂家提供安装服务，有些厂家会收取一部分费用，这要根据各个地区的具体情况决定

　　In addition, installing a glass canopy requires payment, and the installation cost varies depending on the size of the installation area, the equipment and manpower required. Some manufacturers provide free installation services, while others charge a portion of the fee, which depends on the specific situation in each region

　　玻璃雨棚的结构

　　Structure of glass canopy

　　普通的玻璃的确是很容易碎，受到重力撞击更是不堪一击。但是玻璃雨棚使用的玻璃可不是普通玻璃，而是钢化玻璃和夹胶玻璃。钢化的玻璃的强度和抗压能力比普通玻璃高出数倍，有的钢化玻璃甚能承受人流在上面走动。所以玻璃雨棚的坚固性大家可以放心。夹胶玻璃是双层玻璃，中间有一层胶状物质大大提高了它的各项性能，抗压能力也很强。

　　Ordinary glass is indeed very fragile, and it is even more vulnerable to gravity impact. But the glass used in the glass canopy is not ordinary glass, but tempered glass and laminated glass. The strength and compressive strength of tempered glass are several times higher than ordinary glass, and some tempered glass can even withstand people walking on it. So you can definitely rest assured about the durability of the glass canopy. Laminated glass is a double-layer glass with a layer of adhesive material in the middle that greatly improves its various properties and has strong compressive strength.

　　玻璃雨棚的框架结构是使用钢结构，主梁、次梁和柱子都是钢材和钢管，所以玻璃雨棚的框架结构也非常牢固，抗腐蚀能力也很强，不用担心受水份和酸碱物质腐蚀破坏。

　　The frame structure of the glass canopy is made of steel, with the main beam, secondary beam, and columns all made of steel and steel pipes. Therefore, the frame structure of the glass canopy is also very sturdy and has strong corrosion resistance, so there is no need to worry about being corroded by moisture and acidic substances.

　　玻璃雨棚的安装方法

　　Installation method of glass canopy

　　1、加工准备及下料:按照施工图放样，放样和号料时要预留焊接收缩量和加工余量，根据放样作样板钢材下料前必须行矫正，矫正后的偏差值不应超过规范规定的允许偏差值，以保证下料的质量。热加工的型钢先热加工，待冷却后再号孔。钢板预埋件及其他零件切割钻孔及防腐漆处理。

　　1. Processing preparation and cutting: According to the construction drawing, welding shrinkage and processing allowance should be reserved during the layout and marking process. Before cutting the sample steel according to the layout, it must be corrected first. The corrected deviation value should not exceed the allowable deviation value specified in the specifications to ensure the quality of the cutting. Hot processed steel sections are first hot processed and then drilled after cooling. Cutting, drilling, and anti-corrosion coating treatment of steel plate embedded parts and other components.

　　2、测量放线:根据土建标高基准线测预埋件标高中心线，检查预埋件标高偏差、左右偏差。整理结果确定预埋件分隔的调整处理方案。沿楼板外沿弹出墨线定出预埋件顶标高线。

　　2. Measurement and laying out: Measure the centerline of the embedded part elevation based on the civil engineering elevation reference line, and check the elevation deviation and left-right deviation of the embedded part. Organize the results to determine the adjustment plan for the separation of embedded parts. Draw a chalk line along the outer edge of the floor slab to determine the top elevation line of the embedded parts.

　　3、预埋件安装处理:定位预埋件安装位置，打钻安装。要求预埋件位置准确、埋设牢固。标高偏差不大于9mm，左右位移不大于20mm。

　　3. Installation and treatment of embedded parts: locate the installation position of embedded parts and drill for installation. Require accurate positioning and firm embedding of embedded parts. The elevation deviation shall not exceed 9mm, and the left and right displacement shall not exceed 20mm.

　　4、悬挂臂安装焊接:悬挂臂安装采用焊接，需检査焊接节点，调节悬挂臂设计坡度，准确无误方能进行焊接。靠边一条悬挂臂准确无误后，安装另一边一条悬挂臂，就位准确后点焊。然后以此两条悬挂臂为基准拉出悬挂臂的、标高线，--焊接剩余悬挂臂。并焊接无缝钢管。型钢需接长时，先焊接头并矫直。采用型钢接头时，为使接头型钢与钢板预埋件紧贴，应按设计要求铲去楞角。对接缝应在缝的两端焊上引弧板，其材质和波口型式与焊件相同，焊后气割切除并磨平。

　　4. Installation and welding of suspension arm: Welding is used for the installation of suspension arm. The welding nodes need to be checked, and the design slope of the suspension arm needs to be adjusted accurately before welding can be carried out. After the one suspension arm on the side is accurate and correct, install the other suspension arm on the other side, and spot weld it accurately after positioning. Then use these two suspension arms as a reference to pull out the highest and lowest elevation lines of the suspension arms, and weld the remaining suspension arms. And weld seamless steel pipes. When the section steel needs to be extended, weld the joint first and straighten it. When using steel joints, in order to ensure that the joint steel is tightly attached to the steel plate embedded parts, the edges and corners should be removed according to the design requirements. The butt joint should be welded with arc plates at both ends of the joint, with the same material and groove type as the welded part. After welding, it should be cut off by gas cutting and ground flat.

　　5、校准检验:悬挂臂安装后检査现场连接部位的质量。悬挂臂安装质量主要检査悬挂臂竖向面的不垂直度;受压对悬挂臂竖向面的侧面下垂,悬挂臂坡度。保证悬挂臂符合设计受力状态及整体稳定要求。

　　5. Calibration inspection: After installing the suspension arm, first check the quality of the on-site connection parts. The installation quality of the suspension arm mainly checks the non perpendicularity of the vertical surface of the suspension arm; The lateral sagging of the vertical surface of the suspension arm under pressure, and the slope of the suspension arm. Ensure that the suspension arm meets the design stress state and overall stability requirements.

　　6、连接受力拉索:定位拉杆基准线、标高线，按要求安装预埋件，焊接栏杆

　　6. Connect the tension cable: locate the reference line and elevation line of the tension rod, install the embedded parts as required, and weld the railing

　　7、不锈钢玻璃爪安装焊接:按设计尺寸弹出纵横线及设计标高，用夹具夹紧，进行定位点焊，装配完毕，焊接玻璃爪底座。

　　7. Installation and welding of stainless steel glass claws: Draw vertical and horizontal lines and design elevations according to the design dimensions, clamp them with fixtures, perform positioning spot welding, and after assembly, weld the glass claw base.

　　8、防锈喷漆处理:应熔渣及飞溅物，不锈钢件表面喷白漆多遍防锈喷漆处理。涂料及漆膜厚度应符合设计要求或施工规范的规定。以肢型钢内侧的油漆不得漏涂。

　　8. Rust proof spray painting treatment: Slag and splashes should be removed, and the surface of stainless steel parts should be sprayed with white paint multiple times for rust proof spray painting treatment. The thickness of coatings and paint films should comply with the design requirements or construction specifications. The paint on the inner side of the limb steel shall not be missed.

　　9、夹胶玻璃加工制作安装:按设计要求结合实测尺寸确定玻璃尺寸，以及的水平、垂直位置，厂家加工制作。安装不锈钢玻璃爪，玻璃临时固定后进行调整，调整标准平、竖直、面平。偏差不得超过规定偏差。

　　9. Processing, manufacturing, and installation of laminated glass: Determine the glass size and its horizontal and vertical positions according to the design requirements and actual measurement dimensions, and manufacture them by the manufacturer. Install stainless steel glass claws, adjust the glass temporarily after fixing, and adjust the standard to be flat, vertical, and flat. The deviation shall not exceed the specified deviation.

　　10、调整检验:点式玻璃进行整体调整检验，调整标准平、竖直、面平。差不得超过规定偏差。

　　10. Adjustment inspection: Conduct overall adjustment inspection on point glass, adjusting the standard to be flat, vertical, and flat on the surface. The deviation shall not exceed the prescribed limit.

　　11、上下打胶:充分清洁玻璃间缝隙，不应有水、油渍、涂料、铁锈、水泥砂浆、灰尘等。充分清洁粘结面，加以干燥。为调整缝的深度，避免三边粘胶。在缝两侧贴保护胶纸保护玻璃不被污染。上下同时打密封胶，注胶后将胶缝表面抹平，去掉多余的胶。注胶完毕，将保护纸撕掉，必要时用溶剂擦拭玻璃。胶在未完全硬化前，不要沾染灰尘和划伤。

　　11. Top and bottom gluing: Thoroughly clean the gaps between the glasses, and there should be no water, oil stains, paint, rust, cement mortar, dust, etc. Thoroughly clean the bonding surface and dry it. To adjust the depth of the seam and avoid adhesive on three sides. Stick protective tape on both sides of the seam to protect the glass from contamination. Apply sealant both vertically and horizontally, then smooth out the surface of the joint and remove any excess glue. After gluing, tear off the protective paper and wipe the glass with solvent if necessary. Before the glue fully hardens, do not get it contaminated with dust and scratches.

　　12、修补检验:同部修补检验。

　　12. Repair inspection: Same part repair inspection.

　　13、玻璃清洗:整体清洗玻璃尘垢。必要时用溶剂擦拭玻璃,

　　13. Glass cleaning: overall cleaning of glass dust and dirt. Wipe the glass with solvent if necessary,

　　14、清理现场:保护和清洗现场，

　　14. Clean up the site: protect and clean the site,

　　15、竣工验收:竣工验收。

　　15. Completion acceptance: Completion acceptance.

　　玻璃雨棚在市场上的情况是什么样的，还有就是玻璃雨棚的安装流程以及要点有哪些，以及玻璃雨棚的结构有什么样的特点，这些小编都已经在上文中给大家做了详细的介绍了。玻璃雨棚不仅仅是在建筑物的大门处有使用，一些小型的建筑物的屋顶是会直接采用玻璃雨棚，这样既美观，又是非常的直接，是受到很多人的喜爱的设计，在市场上也是非常的受欢迎。

　　What is the price situation of glass canopies in the market, as well as the installation process and key points of glass canopies, and what are the structural characteristics of glass canopies? These have all been introduced in detail by the editor in the previous text. Glass canopies are not only used at the entrance of buildings, but also on the roofs of some small buildings. This design is not only beautiful but also very direct, and is loved by many people. It is also very popular in the market.

　　本文由 济南雨棚  友情奉献.更多有关的知识请点击  //www.shmtd.com/    真诚的态度.为您提供为的服务.更多有关的知识我们将会陆续向大家奉献.敬请期待.

　　This article is dedicated by Jinan Rainshed Friendship For more related knowledge, please click //www.shmtd.com/ Sincere attitude To provide you with comprehensive services We will gradually contribute more relevant knowledge to everyone Coming soon.